While there are advantages to this for certain applications, a black printed circuit board is the best way to minimize external light reflection and conceal the workings of your installation when the display is switched off.
You’ve probably noticed that most LED strips are white in color. Black PCB also absorbs and dissipates heat from LED chips more efficiently than standard white solder mask. Enttec uses superior thickened copper tracks to reduce the effects of volt drop and to allow a more even intensity along the length of the strip. In addition, with 20 individually-addressable pixels per meter, each capable of producing a 32-bit True Color display (4,294,967,296 variations) – this strip is ideal for both stage and architectural applications.
Features
- RGBW, 4 in 1 full color LED pixel strip.
- Individually addressable led pixels, suitable for stage,
entertainment and architectural applications
- 60 Pixels/meter density
- Designed for use with ENTTEC Pixel Link System
- Maximum 13.5 Watts/Metre
- Maximum 355 Lumens/Metre
- SK6812 chips built into 5050 RGB LEDs
- Each pixel can achieve 4,294,967,296 full color display
and scan frequency not less than 400Hz/s
- 3M adhesive double side tape at the back
- Built-in data signal reshaping circuit
- 5V DC input supply voltage
- Flexible construction material
- Small LED pitch
- Can be joined together
- Can be cut into a smaller length
- IP20 Indoor use only
Specifications: Enttec Black pixel strip RGBW (5V) - 4M ■ White Temperature: 4050L - 4250K ■ Lumens/meter RGB: 138, W: 217, Total: 355 ■ Beam Angle: 120° ■ Efficacy (Lm/Watt): 26.3 ■ DMX Channels/LED: 4 ■ Control Protocol: SK6812 ■ Connector: JST SM connectors ■ Pixel Mapping Order: RGBW ■ No front polymer encapsulation seal ■ Operating Temperature: 5°C to 50°C ■ Insulation Rating: IP20 ■ Current Draw: 10 Amps (Maximum Output Current Per Pin (Screw Terminal) ■ Maximum Power Consumption: Red 2.9, Green 2.9, Blue 2.9, All (RGB) 7.9, White 5.5, Total 13.5 Watts ■ Power Consumption: Maximum total Output Power 130 Watt ■ Data Line Voltage: -0.5V ~ VCC+0.5V ■ Power Input: +4.8V ~ +5.2VDC ■ Size: 60 Pixels/meter - L 197"/ 5000mm x W 0.4 / 10mm x H 0.12 ■ Weight (4m roll): 250 g / 0.25 kgs / 0.55 lbs ■ PBC Color: Black
Designed for use with ENTTEC Pixel Link System
Maximum 13.5 Watts/Metre
Maximum 355 Lumens/Metre
SK6812 chips built into 5050 RGB LEDs
Each pixel can achieve 4,294,967,296 full color display
and scan frequency not less than 400Hz/s
3M adhesive double side tape at the back
Built-in data signal reshaping circuit
5V DC input supply voltage
Flexible construction material
Small LED pitch
Can be joined together
Can be cut into a smaller length
IP20 Indoor use only
Specifications: Enttec Black pixel strip RGBW (12V) - 5M ■ White Temperature: 4050L - 4250K ■ Lumens/meter RGB: 138, W: 217, Total: 355 ■ Beam Angle: 120° ■ Efficacy (Lm/Watt): 26.3 ■ DMX Channels/LED: 4 ■ Control Protocol: SK6812 ■ Connector: JST SM connectors ■ Pixel Mapping Order: RGBW ■ No front polymer encapsulation seal ■ Operating Temperature: 5°C to 50°C ■ Insulation Rating: IP20 ■ Current Draw: 10 Amps (Maximum Output Current Per Pin (Screw Terminal) ■ Maximum Power Consumption: Red 2.9, Green 2.9, Blue 2.9, All (RGB) 7.9, White 5.5, Total 13.5 Watts ■ Power Consumption: Maximum total Output Power 130 Watt ■ Data Line Voltage: -0.5V ~ VCC+0.5V ■ Power Input: +4.8V ~ +5.2VDC ■ Size: 60 Pixels/meter - L 197"/ 5000mm x W 0.4 / 10mm ■ Weight (5m roll): 250 g / 0.25 kgs / 0.55 lbs ■ PBC Color: Black
Country Of Origin: Australia
Unspsc: 39112402
U.S.Tariff#: 8537.10.9060
Warranty: 1 Year Limited
Color: Black